From time to time my TSU9400 acts up and the screen is not calibrated. I have to go into setting to re-calibrate. Anyone know why this happens ? I have the latest firmware.
↧
Problem with TSU9400's calibration
↧
...please wait...
I have a macro with a 4s delay, during which time I'd like to show ...PLEASE WAIT... on the screen of my TSU-9400.
If possible blinking.
Is this at all possible?
If possible blinking.
Is this at all possible?
↧
↧
Pep 3 installs but help files don't work
Can anyone here help. I am running windows 7. When I instal either pep 2 or 3 it all works but the help section doesn't, it opens but empty of content. When I use explorer and go to help directory in windows, it is full of files though. Is this a windows 7 issue that can be fixed as I won't manage to learn to program the remote without help files. Help would be greatly appreciated
Ray
Ray
↧
TSU9600 backlight won't shut off
My TSU9600 has been acting up lately, in that the backlight no longer turns off. I've checked the settings (timeout set to 15 seconds) and reloaded the configuration file just to make sure it's not a software issue.
Any suggestions on what I should do next to troubleshoot the problem? I'm willing to open it up to poke around inside. I'm not an electronic technician, but I'm reasonably handy with a multimeter and a soldering iron, so if a switch or button needs replacing I could probably handle it.
Any suggestions on what I should do next to troubleshoot the problem? I'm willing to open it up to poke around inside. I'm not an electronic technician, but I'm reasonably handy with a multimeter and a soldering iron, so if a switch or button needs replacing I could probably handle it.
↧
internet page
a script to open a internet page how would it look in a tsu 9600
i whant to send this
http://10.10.10.105/api/callAction?deviceID=21&name=turnOff
i whant to send this
http://10.10.10.105/api/callAction?deviceID=21&name=turnOff
↧
↧
IR Learning Issues
My TSU9600 pronto appears to be finding it hard to learn my remote codes at the moment. It seems to sometimes not recognise an IR code, then it beeps to say its received it, and shows some code. Sometimes the IR code is in black or then blue. It states it has learned it ok but when I test it - it either does not work or only works once. For example the up function will move up once but not again. However if I then hit another button it seems to reset and allow the up buton to work once again. Very strange.
I also have a Touchsquid, and I have in the past used that to get codes into the... [More Content]
I also have a Touchsquid, and I have in the past used that to get codes into the... [More Content]
↧
Issue with Calling Extender from a Pronto Library Function
Have struck a problem with coding whilst trying to query an sound bar through RS-232.
Below code works when linked to a Button, but when I move the code to a Library and run the function from the button it keeps coming up 'undefined'.
Can an extender be called from a Library Function or does it need to be done within an Button script? Maybe I've missed something completely?
Library Function:
panoramatest()
{
var s;
var t,v;
var e = CF.extender[1]; // RFX 9600
if(!e)
{
t="Extender 1 is not defined";
}
else
{
s=e.serial[0]; // Serial Port 1
s.bitrate=19200;
... [More Content]
Below code works when linked to a Button, but when I move the code to a Library and run the function from the button it keeps coming up 'undefined'.
Can an extender be called from a Library Function or does it need to be done within an Button script? Maybe I've missed something completely?
Library Function:
panoramatest()
{
var s;
var t,v;
var e = CF.extender[1]; // RFX 9600
if(!e)
{
t="Extender 1 is not defined";
}
else
{
s=e.serial[0]; // Serial Port 1
s.bitrate=19200;
... [More Content]
↧
ProntoEdit Pro 3 - Help Files?
I haven't posted in ages, but I still use three TSU9600s and a TSU9800. I have been using PEP 3 on three of the four Prontos with no issues at all. My question is this, were there ever any Help files for this version?
↧
Late newbie with a TSU9600 - idiots guide to pronto
Hi all ive just got hold of a tsu9600 (yes i know im quite late for the party) now i have no experience with programming, scripts etc..ive downloaded pep3 and added all my devices i managed to get the unit to turn on all required devices and activities. Now my problem is i cant figure out
1) how to turn off certain devices when im switching between activities.
2) how i can control devices with the tsu9600 eg volume channel up and down
These are just the first two stumbles ive come across, ive searched this oracle of a site but nothing is in simple terms for a simple guy like me lol. Any... [More Content]
1) how to turn off certain devices when im switching between activities.
2) how i can control devices with the tsu9600 eg volume channel up and down
These are just the first two stumbles ive come across, ive searched this oracle of a site but nothing is in simple terms for a simple guy like me lol. Any... [More Content]
↧
↧
Update CCF/PCF time! SU960 & SU7000
Its that time of the year to up day my 2 prontos.
Using windows XP on my old laptop I installed pronto edit 4 then plugged the SU960 via USB and nothing! (yes I woke it up first).
I only do these updates at most once a year but am getting fedup with these connection problems with my prontos, which when working I like.
Help?
IF I can get these working I can see me throwing out of the window and getting replacements.
Any recommendations?
Using windows XP on my old laptop I installed pronto edit 4 then plugged the SU960 via USB and nothing! (yes I woke it up first).
I only do these updates at most once a year but am getting fedup with these connection problems with my prontos, which when working I like.
Help?
IF I can get these working I can see me throwing out of the window and getting replacements.
Any recommendations?
↧
pronto IR codes for linn
HI team,
please help, im getting into programming my pronto system,
I trying to get my linn amp to changer to digital input 2, so it can connect to apple TV, but this input doesn't seem to be in the codes library,
I have found out from linn the code I need is 0x34, but this is in rd5, I have tried to conver it makehex but its a bit above me and doesn't have linn in the catalogue.
please can someone give me the converted 0x34 code please
thank you very much
please help, im getting into programming my pronto system,
I trying to get my linn amp to changer to digital input 2, so it can connect to apple TV, but this input doesn't seem to be in the codes library,
I have found out from linn the code I need is 0x34, but this is in rd5, I have tried to conver it makehex but its a bit above me and doesn't have linn in the catalogue.
please can someone give me the converted 0x34 code please
thank you very much
↧
TSU9200 assistance needed
Hi guys.
I'm not able to get my pristine, out of the box, brand new TSU9200 connected via USB with my laptop. All I get is a USB driver error message. What to do?
I'm running a Win7 x64 VAIO, on it VMWare 10 32bit, virtually running Win Vista Ultimate within I've installed the Pronto configurationsoftware and USB driver. Within Vista of course. Vista tells me the driver works fine.
I can connect the remote with USB. Offcourse Win7 then tells me it can't find a driver for it. After that I tell VM to connect the USB to Win Vista by disconnecting it from the host, Win 7, but that is where it... [More Content]
I'm not able to get my pristine, out of the box, brand new TSU9200 connected via USB with my laptop. All I get is a USB driver error message. What to do?
I'm running a Win7 x64 VAIO, on it VMWare 10 32bit, virtually running Win Vista Ultimate within I've installed the Pronto configurationsoftware and USB driver. Within Vista of course. Vista tells me the driver works fine.
I can connect the remote with USB. Offcourse Win7 then tells me it can't find a driver for it. After that I tell VM to connect the USB to Win Vista by disconnecting it from the host, Win 7, but that is where it... [More Content]
↧
TSU 9600 Changes TV Channel Randomly??
I am running the most recent firmware, but every now and again, the Pronto will just change the TV channel on its own. it can be very annoying.
This happen to anyone else?
Any clue why this happens -- and how to stop it?
thanks
George
This happen to anyone else?
Any clue why this happens -- and how to stop it?
thanks
George
↧
↧
Replacement for TSU 9400
I believe my beloved 9400 is not long for this world and wanna be prepared if it dies out. Is there *anything* even close to this remote out there as a suitable replacement? it MUST have the ability to open IP sockets and script custom strings via IP to integrate into my crestron system.
Thanks
Thanks
↧
Javascript after waking up
I have spent some time adapting my TSU-9600 to work with Global Cache iTach units so I could use my Tablets (via Command Fusion) as well as my Pronto to talk to my equipment. I implemented a hybrid of Barry Gordon's Finite State Machine in that whenever a button is pressed, each command is added to a command queue and executed on a first in first out basis by a function. Everything works very well when the tablet is awake.
The issue is when the remote wakes up from sleep. If the remote is on and I hit a button it places the command or commands in the command Que for FIFO processing as... [More Content]
The issue is when the remote wakes up from sleep. If the remote is on and I hit a button it places the command or commands in the command Que for FIFO processing as... [More Content]
↧
Repair (or replacement) for TSU9400
I have a TSU9400 that seems to have died- my two kids were tussling over it and it reset. It will no longer work nor make the red light on the charging base illuminate- no visible damage though.
I tried the Canada repair facility listed on the site- they no longer have parts. Also tried Service Wide Technology without any response. Anyone know if they're still around?
Before I try to open it up myself; wanted to know if there are any repair options anymore??
Does anyone have one they want to get rid of?
Thanks.
I tried the Canada repair facility listed on the site- they no longer have parts. Also tried Service Wide Technology without any response. Anyone know if they're still around?
Before I try to open it up myself; wanted to know if there are any repair options anymore??
Does anyone have one they want to get rid of?
Thanks.
↧
Last straw wanted to edit my TSU9400
Tried most everything to download to the remote in Windows 7.
The HID not found issue was at first a workaround by temporarily removing two user HID entries in W7.
But now not even this works anymore: "TSU9400 not found"...
Reset the TSU9400, even tried to run XP parallel on my PC, which was a disaster because XP overwrote the c:/ partition, although I had directed the install to a free partition!
Please help if you can...
What can I try?
The HID not found issue was at first a workaround by temporarily removing two user HID entries in W7.
But now not even this works anymore: "TSU9400 not found"...
Reset the TSU9400, even tried to run XP parallel on my PC, which was a disaster because XP overwrote the c:/ partition, although I had directed the install to a free partition!
Please help if you can...
What can I try?
↧
↧
Cambridge Audio Azur 740a fur Pronto TSU9400
Hallo Leute, bin neu
Vielleicht konnt Ihr mir weiter helfen, ich versuche ganz verzweifelt den Ein/Aus Code von dem Verstarker "Cambridge Audio Azur 740a" auf die Pronto einzuspielen.
Aber irgendwie geht das nicht, entweder schaltet sich das Gerat aus oder es geht nichts.
Jedesmal, wenn ich den Code einspiele sieht er anders aus!
Wer weiss bescheid, benutzt Cambridge ein anderes verfahren?
Hat Irgend jemand den Orginalcode zum Kopieren von diesem Gerat?
Besten Dank fur die Bemuhungen
Chrigel69
________________________
Hi folks, I'm new
Maybe you can help me, I'm trying very desperately... [More Content]
Vielleicht konnt Ihr mir weiter helfen, ich versuche ganz verzweifelt den Ein/Aus Code von dem Verstarker "Cambridge Audio Azur 740a" auf die Pronto einzuspielen.
Aber irgendwie geht das nicht, entweder schaltet sich das Gerat aus oder es geht nichts.
Jedesmal, wenn ich den Code einspiele sieht er anders aus!
Wer weiss bescheid, benutzt Cambridge ein anderes verfahren?
Hat Irgend jemand den Orginalcode zum Kopieren von diesem Gerat?
Besten Dank fur die Bemuhungen
Chrigel69
________________________
Hi folks, I'm new
Maybe you can help me, I'm trying very desperately... [More Content]
↧
Philips REST API
I am trying to help a friend in Germany with control of a Philips TV that has the REST API. I can send any sort of GET command to the TV over IP and I always get the correct response. When I send a POST command with a control command formatted as a JSON string, I always get back a 400 status which the API states is a bad request, in essence the JSON strong is not valid. I cannot see the error.
What would help me greatly is a sniffer trace of the traffic from a control system to a Philips TV that uses the Rest interface. In that way I could see the exact payload that works. The string I... [More Content]
What would help me greatly is a sniffer trace of the traffic from a control system to a Philips TV that uses the Rest interface. In that way I could see the exact payload that works. The string I... [More Content]
↧
Marantz RC9001 RX8001 Command Failed
I have a Marantz RC9001 and RX8001 I am trying to configure to work via a network. Similar to TSU9600 and RFX9400.
And I suspect I have multiple problems stemming from the fact I cannot update the firmware on the RX8001.
The RC9001 can see the router and talk to it, I can ping the RC9001 (set to DHCP) with MAC address assigned, however I when i press a command i get the following error message Command Failed, the diagnostic tab tells me Event 0464 Extender 2 IP address is unknown.
The RX8001 is connected to the router via an Ethernet cable (straight through), settings as follows for... [More Content]
And I suspect I have multiple problems stemming from the fact I cannot update the firmware on the RX8001.
The RC9001 can see the router and talk to it, I can ping the RC9001 (set to DHCP) with MAC address assigned, however I when i press a command i get the following error message Command Failed, the diagnostic tab tells me Event 0464 Extender 2 IP address is unknown.
The RX8001 is connected to the router via an Ethernet cable (straight through), settings as follows for... [More Content]
↧